| Type of Vessel |
Anchor Handling Supply Tugboat |
| Class |
ABS + A1 E ; Offshore Support Vessel, FF1
equipped with Dynamic positioning class 2 system |
| Maximum Draft
Designed Speed Bollard Pull
|
6.00 metres
14 knots (at ballast condition)
141 tons |
| Bulk Cement |
4 X 2500 cu.ft. (4 x 75.5m3) |
| Main Engines |
2 units x MaK Diesel Engine,
2 X 5,400 BHP@ 600 RPM. |
| Propulsion |
Twin screw controllable pitch propeller, each 3.8m dia |
| Generating Sets |
2
units Caterpillar 3412 engine each driving a 580KW
alternator,
2 units shaft generator, each driving a 2000KW alternator |
| Bow Thruster
Stern Thruster |
2 x 9.5 tons cap. Controller pitch type
2 x 9.5 tons cap. Controller pitch type |
| Stern roller |
2500 mm dia. x 6 m , Cap 450
tons |
| Towing/Anchor
handling Winch
Rope Reels |
|
Brattvaag 300 tons
Brake holding capacity : 400 tons(1st layer)
Drum capacity: 2000 m. x 76 mm.dia.
2 x 6.7.0 tons pull, wire capacity – 2000m x 76mm dia |
|
| Tugger winch |
2 units 10 tons x 30m/min. |
| Capstan |
2 units 10 tons x 25m/min |
| Windlass |
Electro hydraulic, 14 tons @
13m/min. |
| Deck space (wood
sheathed) |
37.0 m x 12.6 m (466 sq.m) |
| Fire-pump
Fire monitor |
FF1 – 2 x 1600 m3/hr x 14 bar . Power take off
from main engine
2 units at 1500 m3/hr each |
| Fuel oil transfer pump |
2 x 150 m3/hr. at 80 m head |
| Fresh water transfer pump |
2 x 150 tons/hr. at 80 m head |
| Liquid mud pump |
2 x 100 tons/hr. at 50 m head |
| Drill Water/ Cargo F.W Pump |
1 x 150 tons/hr. at 80 m head |
| Navigational Aids |
GMDSS (Area A3), Mini-M, Radars, Gyro-compass, Auto Pilot,
GPS, Satellite navigator, SSB, VHF, Echo Sounder, Navtex
receiver, weather fax, AIS,
|
